AVENO MBike 5W-40

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO MBike 5W-40
product title
0002-000808-001
0002-000808-004
0002-000808-005
0002-000808-020
0002-000808-060
0002-000808-200
0002-000808-999
Article number: 0002-000808
AVENO MBike 5W-40 is an engine oil based on hydrocrack oils and selected additives for demanding 4-stroke motorbikes. It is characterised by very high oxidation stability, excellent lubricant film adhesion and reliability under any load and is specially designed for wet and oil-lubricated clutches. wet and oil-lubricated clutches. AVENO MBike 5W-40 protects the engine from deposits and ensures a long service life.
Application Note
AVENO MBike 5W-40 is suitable as an engine oil for all air- and water-cooled 4-stroke motorbikes if the viscosity 5W-40 is required. The operating instructions of the engine manufacturer must be observed!
Characteristics
  • Very good shear stability
  • Very good cold start properties
  • High safety reserves even under boundary lubrication conditions
  • Prevention of premature wear
  • Optimum function of engine, clutch and gearbox
  • Very good resistance to oxidation and high-temperature engine deposits
  • Tested and proven additives
Viscosity
5W-40
Specification
API SN, JASO MA2
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C83.0MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C13.7MM²/SDIN 51659-2:2017-02
Viscosity Index169DIN ISO 2909:2004-08
AppearanceYELLOWBROWNVISUELL
Viscosity CCS at °C5770MPA*SASTM D 5293:2020
Density at 15°C851KG/M³DIN EN ISO 12185:1997-11
Flash Point (COC)244CELSIUSDIN EN ISO 2592:2018-01
Pour Point-42°CASTM D 7346:2015
Total Base Number (TBN)7.2MGKOH/GASTM D 2896:2021
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.