AVENO LHC 0W-30

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO LHC 0W-30
product title
0002-000038-001
0002-000038-004
0002-000038-005
0002-000038-020
0002-000038-060
0002-000038-200
0002-000038-999
Article number: 0002-000038
AVENO LHC 0W-30 is a fully synthetic smooth-running engine oil for petrol and diesel car engines of light transporters and high-performance vehicles with diesel particulate filter DPF and 3-way catalytic converters which require a minimum HTHS of 3.5 mPa*s. AVENO LHC 0W-30 is characterized by excellent cold starting behavior and extends the lifespan of diesel particulate filters, DPF, and 3-way catalytic converters, TCW, thanks to special additives. AVENO LHC 0W-30 achieves a high viscosity index thanks to its formulation with special base oils.
Application Note
AVENO LHC 0W-30 is an energy-efficient engine oil for year-round use, and can be used in modern petrol and diesel car engines. AVENO LHC 0W-30 is suitable for extended oil change intervals and extends the lifespan of the particulate filter. The operating instructions of the automobile and engine manufacturer must be observed.
Characteristics
  • Excellent cold starting properties, even at low temperatures below -25°
  • A very stable and excellent viscosity behavior and shear stability
  • Fuel savings under all operating conditions
  • Secure lubricant film at high operating temperatures
  • Neutrality towards sealants
  • Low evaporation, thus low oil consumption
  • Excellent protection against wear, corrosion and foaming
  • Suitable for catalytic converters
  • Extended oil change intervals protect natural resources
Viscosity
0W-30
Recommendation
BMW Longlife-04, dexos2™, MB 229.31, MB 229.51, Renault RN0700/RN0710, VW 502 00/505 00/505 01
Specification
ACEA C2/C3
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C66.8MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C11.9MM²/SDIN 51659-2:2017-02
Viscosity Index176DIN ISO 2909:2004-08
AppearanceYELLOWVISUELL
Viscosity CCS at -35°C5800MPA*SASTM D 5293:2020
Density at 15°C840KG/M³DIN EN ISO 12185:1997-11
Pour Point-60°CASTM D 7346:2015
Total Base Number (TBN)6.8MGKOH/GASTM D 2896:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.