AVENO Antifreeze A13

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

  1. Aveno
  2. Range
  3. Antifreeze
  4. AVENO Antifreeze A13
AVENO Antifreeze A13
product title
0002-000778-005
0002-000778-015
0002-000778-020
0002-000778-060
0002-000778-200
0002-000778-999
Article number: 0002-000778
AVENO Antifreeze  A13 is a concentrated Monoethylene Glycol based coolant, in combination with the lobrid additive package (OAT-Si), intended for the protection of cooling systems of motor vehicles which must be diluted with water before use. Especially recommended for cooling systems passenger cars and light duty vehicles when coolant meeting requirements of G13 standard (VW TL 774-G) is required.
Application Note
AVENO Antifreeze A13 is compatible with coolants meeting former specifications: G12 (VW TL 774 D), G12+ (VW TL 774 F). Do not use pure product. Dilute with distilled water according to the required freezing protection: see table. To maintain anti-corrosion properties, do not dilute below 33% of antifreeze. For optimal cooling effect, do not dilute above 66% of antifreeze. To be used for top-up or complete renewal of the cooling circuit for improved efficiency. Water for dilution: if possible use distilled water (maximum hardness 35°F and chlorides and sulphates maximum contain 500 ppm). Drain intervals: Refer to the manufacturers' recommendation. Attention, control or drain the coolant only when the engine is cold. Can be mixed with ethylene glycol based coolants. This product should not be used to protect drinking water systems against freezing. Observe the mixing table.
Characteristics
  • Provides aluminium reinforced protection at high temperature
  • Eliminates the risk of scaling and deposits in the cooling system
  • Avoids cavitation and increases water pump lifetime
  • Compatible with gaskets, hoses, and plastic components
  • Can be mixed with ethylene glycol based coolants
Viscosity
Recommendation
Porsche/VW/AUDI/Seat/Skoda TL 774-G
Specification
ASTM D 1384, VW TL 774-G
PROPERTIESDATAUNITEXAMINATION AFTER
AppearanceRED / PINKVISUELL
Density at 20°C1120KG/M³DIN EN ISO 12185:1997-11
Product Data Sheet
Download PDFDownload PDF
Request a price

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.