AVENO Mineral Hydraulic HLP 46

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Mineral Hydraulic HLP 46
product title
0002-000312-020
0002-000312-060
0002-000312-200
0002-000312-999
Article number: 0002-000312
AVENO Mineral Hydraulic HLP 46 is an optimally alloyed hydraulic oil. It has a high level of performance and a wide range of applications within the entire industry. AVENO Mineral Hydraulic HLP 46 is characterized especially by a very good viscosity and temperature behavior, high resistance to aging and reliable corrosion protection.
Application Note
AVENO Mineral Hydraulic HLP 46 is suitable for all hydraulic systems and universally applicable. The use of AVENO Mineral Hydraulic HLP 46 is recommended especially for use in circulation systems, for the supply of small gearboxes, for thermally highly stressed hydraulic systems with high-pressure pumps of all models, in sensitive control systems, and for hydraulic systems in agriculture.
Characteristics
  • High level of performance
  • Very good viscosity and temperature behavior
  • High resistance to aging
  • Excellent wear protection
  • Reliable corrosion protection, neutral towards sealants
Viscosity
ISO VG 46
Recommendation
Arburg, Atos, Bosch Rexroth RE-90220, Danieli Hydraulics, Denison HF-0/HF-1/HF-2, Eaton/Sperry Vickers I-286-S, Eaton/Sperry Vickers M-2950-S, Fives Cincinnati P-55/P-70, GM LH-02-1-04, GM LS-2, Metso, Müller Weingarten, Sauer-Danfoss 520L0463, ZF TE-ML 07H
Specification
AFNOR NF E 48-603 HM, ASTM D6158, CETOP RP 91H HM, DIN 51524-2, GB 111118.1 L-HM (conventional), ISO 11158 HM, ISO 6743-4 HM, JCMAS HK, MIL-PRF-17672 E, NATO H-573, SAE MS1004 HM, SEB 181 222, US Steel 126/127/136, VDMA 24318
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C46.1MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C7.2MM²/SDIN 51659-2:2017-02
Viscosity Index116DIN ISO 2909:2004-08
AppearanceYELLOWBROWNVISUELL
Density at 15°C864KG/M³DIN EN ISO 12185:1997-11
Pour Point-36°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.