AVENO Truck Gear LongLife 75W-80 RED

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Truck Gear LongLife 75W-80 RED
product title
0002-000218-001
0002-000218-004
0002-000218-005
0002-000218-020
0002-000218-060
0002-000218-200
0002-000218-999
Article number: 0002-000218
AVENO Truck Gear LongLife 75W-80 RED is a synthetic high-performance light-running gear oil with a special additive and inhibition which ensure a perfect functioning of the transmission. AVENO Truck Gear LongLife 75W-80 RED has been specially developed for the requirements of commercial vehicle transmissions and is ideally suited for very high mechanical and thermal loads even at longest oil change intervals.
Application Note
AVENO Truck Gear LongLife 75W-80 RED is a high-performance gear oil for the supply of synchronized commercial vehicle transmissions with intarders or retarders. The switching comfort is significantly increased. Extreme oil change intervals according to the manufacturer's instructions up to 500,000 km lower the maintenance costs and increase the profitability.
Characteristics
  • High additive reserves for extended oil change intervals
  • Best wear protection and gear efficiency
  • Fuel savings even on short journeys, even at low outside temperatures
  • Stable lubricating film even under high loads
  • Exceptionally good corrosion protection
  • Good non-ferrous metal compatibility
  • Prevention of oil thickening and deposits through high oxidative resistance
  • The units are clean even after very long oil change intervals
  • Extreme shear stability
  • Very strong protection against corrosion, rust and foam formation
  • Excellent EP properties
Viscosity
75W-80
Approval
MAN 341 Typ Z-4, ZF TE-ML 16K/01L/02L
Recommendation
DAF, Eaton (Extended drain), Iveco 18-1807, MAN 341 Typ E3, MAN 341 Typ V-R, VOLVO 97305, VOLVO 97307, VOLVO 97318
Specification
API GL-4, MIL-L-2105
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C55.3MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C9.5MM²/SDIN 51659-2:2017-02
Viscosity Index158DIN ISO 2909:2004-08
AppearanceREDVISUELL
Density at 15°C855KG/M³DIN EN ISO 12185:1997-11
Pour Point-42°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.