AVENO Gear Extra 85W-140

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Gear Extra 85W-140
product title
0002-000203-001
0002-000203-004
0002-000203-005
0002-000203-020
0002-000203-060
0002-000203-200
0002-000203-999
Article number: 0002-000203
AVENO Gear Extra 85W-140 is a multigrade hypoid gear oil of highest stability and oxidation resistance. Its EP additives show a stable lubricating film even at the highest load on the tooth flanks and a high sliding component and reduce wear. AVENO Gear Extra 85W-140 is mainly used in heavily loaded hypoid gears with extreme operating conditions. It is the ideal transmission fluid for differential and differential in the rear axle.
Application Note
AVENO Gear Extra 85W-140 is used in maximum duty, hypoid-geared gears such as axle drives and manual gearboxes.
Characteristics
  • Very good oxidation stability
  • No foam formation
  • Low pour point
  • Protection against rust and corrosion
Viscosity
85W-140
Recommendation
DAF, Ford M2C-9002-A, GM, Mack GO-CS 3000B, Mack GO-G, MAN 342 Typ M1, Scania STO 1:0, VOLVO 97310, ZF TE-ML 05A/12E/16D/21A
Specification
API GL-5, MIL-L-2105 D
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C348.7MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C26.5MM²/SDIN 51659-2:2017-02
Viscosity Index101DIN ISO 2909:2004-08
AppearanceYELLOWBROWNVISUELL
Density at 15°C897KG/M³DIN EN ISO 12185:1997-11
Pour Point-24°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.