AVENO Dexron III G RED

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Dexron III G RED
product title
0002-000158-001
0002-000158-004
0002-000158-005
0002-000158-020
0002-000158-060
0002-000158-200
0002-000158-999
Article number: 0002-000158
AVENO Dexron III G RED is designed on a basis of hydrocrack oils and PAO with special additives and inhibition. AVENO Dexron III G RED was developed especially for the indicated specifications and purposes. It provides maximum lubrication and wear protection thanks to its special additives. AVENO Dexron III G RED is a universal ATF (Automatic Transmission Fluid) of the latest generation for all automatic gearboxes with and without regulated converter lockup clutch (so-called gear-clutch lock-up), for which gear fluids of type Dexron III H are required.
Application Note
AVENO Dexron III G RED is especially suitable for use in gearboxes with ATF Dexron III G specifications. AVENO Dexron III G RED is miscible with all brands of ATFs. It is recommended to flush with AVENO Dexron III G RED first, before the final filling with AVENO Dexron III G RED is performed. The operating instructions of the automobile and engine manufacturer must be observed.
Characteristics
  • Reliable protection against wear, corrosion and foaming
  • High and very stable viscosity index
  • Problem-free at very low temperatures
  • Very low pour point
  • Very good oxidation stability
  • Well coordinated friction properties
  • Neutral towards sealing agents
  • Neutral behavior towards non-ferrous metals due to inhibition
Viscosity
ATF
Recommendation
DTFR 13C100 (236.1), MB 236.5, Ford WSA-M2C195-A, MAN 339 Typ Z-1/V-1, VOITH H55.6335.XX (G607), ZF TE-ML 02F/03D/04D/09/11B/14A/17C
Specification
Ford MERCON®, GM Dexron® III G
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C35.0MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C7.2MM²/SDIN 51659-2:2017-02
Viscosity Index176DIN ISO 2909:2004-08
AppearanceREDVISUELL
Density at 15°C848KG/M³DIN EN ISO 12185:1997-11
Pour Point-54°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.