AVENO ATF DX VI RED

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO ATF DX VI RED
product title
0002-000186-001
0002-000186-004
0002-000186-005
0002-000186-020
0002-000186-060
0002-000186-200
0002-000186-999
Article number: 0002-000186
AVENO ATF DX VI RED is an automatic gear oil on a basis of the latest technology of HC/HT hydrocrack oils, which is permitted by General Motors for use in vehicles with automatic gearboxes. The special formulation ensures a lifespan that is twice as long as that of a comparable ATF oil. AVENO ATF DX VI RED meets the requirements of the gear oil specifications of General Motors for all vehicles with hydramatic automatic gearboxes from 2006 onwards.
Application Note
AVENO ATF DX VI RED is fully backward compatible with DEXRON®-III (H), III and IIE applications. Always follow the recommendations in your vehicle's instruction manual.
Characteristics
  • Good resistance against lubricant failures under hard operating conditions
  • Outstanding resistance to oil sludge and deposit formation
  • Superior wear protection
  • Longer change intervals
  • Excellent fluidity at low temperatures
  • Prevention of coupling grinding in modulation rotary converters
Viscosity
ATF
Recommendation
ATF Type 3.0, ATF Type 3.1, BMW/Mini ATF 3+, Ford MERCON® LV, Ford/Lincoln/Mercury XT-6-DSP [SP], Ford/Lincoln/Mercury XT-6-QSP [SP], Honda ATF DW-1, Hyundai/Kia NWS 9638 T-5, Isuzu ATF WSI , Jaguar/Land Rover Fluid 8432, Mazda FZ, Mazda FW 6A EL, Mazda FW 6AX EL, MB 236.12, MB 236.14, MB 236.41, Mitsubishi ATF-J3, Mitsubishi Diaqueen ATF-PA, Nissan Matic-S, Porsche 000 043 304 00, Shell 3353/134/M-1375.4/12108, SP-IV/SPH-IV/SP-IV-RR, Toyota Scion FZ, Toyota WS (JWS 3324), VOLVO 97342 (AT 102), Volvo 97342 AT102, VW G 052 533, VW G 055 005 A/A2, VW G 055 540 A2, VW G 060 162 A1/A2/A6, ZF Lifeguardfluid 5/6
Specification
Aisin Warner AW-1, GM Dexron® VI
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C29.7MM²/SDIN 51659-2:2017-02
Kinematic Viscosity at 100°C6.0MM²/SDIN 51659-2:2017-02
Viscosity Index154DIN ISO 2909:2004-08
AppearanceREDVISUELL
Density at 15°C841KG/M³DIN EN ISO 12185:1997-11
Pour Point-51°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.