AVENO Petrol Power&Protect

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

  1. Aveno
  2. Range
  3. Additive
  4. AVENO Petrol Power&Protect
AVENO Petrol Power&Protect
product title
0002-300005-300
Article number: 0002-300005
AVENO Diesel Power&Protect is a highly effective fuel additive for all diesel engines, with and without exhaust aftertreatment system, for intensive cleaning of the diesel system, to increase the operational safety and economy of diesel engines. AVENO Diesel Power&Protect is suitable for electronically and mechanically controlled injection nozzles. Special raw materials are used to remove deposits on the injection system that interfere with operation, enabling clean, optimum, low-soot and particle-reduced combustion and also extending the service life of the exhaust system. AVENO Diesel Power&Protect reduces nailing, optimizes engine running, protects the fuel system from corrosion and at the same time from new deposits. The special additive increases the cetane number, improves ignitability, promotes optimum combustion and thus leads to fuel savings, increases engine performance and also improves the lubricating effect of low-sulphur fuel.
Application Note
AVENO Diesel Power&Protect is added to the diesel fuel and used as a preventative measure at every inspection. Suitable for modern common-rail and pump-nozzle systems. It can also be used in bio-diesel or mixtures of diesel fuel with bio-diesel. Cleaning process via the tank: Can contents are sufficient for approx. 80 liters of diesel fuel. (Mixing ratio: 1 : 250). Add the appropriate amount depending on the tank filling. Repeat the process after 2000 km. Cleaning process via the filter housing: Always replace the filter! Fill the filter housing completely with AVENO Diesel Power&Protect and bleed. Start the engine and let it run at various engine speeds until the additive has been used up (max. 2000 rpm).
Characteristics
  • Cleaning of diesel injection system and combustion chamber
  • Fuel savings and reduction of CO2 and HC emissions
  • Optimum engine performance and smooth engine running
  • High corrosion protection
  • Increases the lubricating effect with low-sulphur fuel
  • Improves ignitability and reduces fuel-related "nailing"
  • Cleaning of the injection system
  • Restores full engine performance
  • Reduction of smoke development
  • Binding of water in the tank and fuel system
  • Precise fine atomization of the diesel fuel
  •  
Viscosity
PROPERTIESDATAUNITEXAMINATION AFTER
AppearanceYellowVISUELL
Density at 15°C832KG/M³DIN EN ISO 12185:1997-11
Flash Point (COC)110°CDIN EN ISO 2592:2018-01
Pour Point-36°CASTM D 7346:2015
Product Data Sheet
Download PDFDownload PDF
Request a price

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.